General Decay Synchronization and H ∞ Synchronization of Multi-weighted Coupled Reaction-diffusion Neural Networks

This paper investigates the general decay synchronization and general decay H∞ synchronization problems of multi-weighted coupled reaction-diffusion     

Removal and repair techniques for thermal barrier coatings: a review

ABSTRACT

A comprehensive literature review of the existing techniques for removing and repairing of damaged thermal barrier coatings is presented, with the focus on top ceramic coats. The advantages and disadvantages of each technique are compared and assessed. The review shows that there is not a universal method applicable to all coating systems. The selection of the coating removal and repair process must be specific to damaged coating systems, based on their composition, type of damages, and available resources. This review will provide some inside look at various approaches in an effort to meet the different coating repair needs.     

湖南省郴州市饭垄堆北段锡钨多金属矿勘查方法优化

湖南省郴州市饭垄堆北段锡钨多金属矿位于湘南钨锡钼铋多金属成矿带东坡矿田内，成矿地质条件优越，具有很好的找矿前景。根据该矿床地质特征以及已有的地质矿产勘查成果，系统总结了矿区101、102、103号主矿体特征。在此基础上，进一步讨论了该类裂隙充填细脉带型锡钨多金属矿床在勘查过程中探矿工程布置的优化方法：即：①探矿工程不宜按每个矿带单独控制，应对整个赋矿层位进行整体控制；②应对含有毒砂、锡、钨细脉的岩性段进行连续取样化验，既可避免漏矿，又可以为将来工业指标调整后重新圈定矿体提供直接依据。     

Microstructural characteristic,outward-inward growth behavior and formation mechanism of MAO ceramic coating on the surface of ADC12 Al alloy with micro-groove

The ceramic coatings on the surface of aluminum alloy substrates with micro-grooves have been successfully fabricated in the silicate solution via micro-arc oxidation (MAO) approach. Microstructure characterization showed that the larger main discharge channels were located in the center of micro-groove, the smaller secondary discharge channels were located on both sides of main discharge channel; and a few irregular micro-pores existed in the vicinity of all discharge channels, which were mainly cause by the rapid cooling and solidification of discharge channels hindering the removal of gases produced via reaction. Moreover, the growing direction of coating in the initial stage was mainly outward-growth and resulted in the formation of inverted triangle coating structure, which was due to the sharp-angled effect. But in the final growing stage, the inward-growth behavior played a key role owing to the spark transfer. According to above results and discussion, the formation of smooth, uniform and homogeneous ceramic coating on the surface of whole trapezoidal micro-groove substrate contained four stages: anodic oxidation growth, sharp corner rapid growth, coating homogenization and groove self-filling.     

PCEC hydrogel used on sustained‐release hyaluronic acid delivery with lubrication effect

Injection of bionic synovial fluid (BSF) is a conventional method to improve the lubricity of artificial joints, but BSF cannot maintain long due to the dilution and degradation of BSF in human body. To prolong the effectiveness of hyaluronic acid (HA), which is the major component of BSF, this study applies a temperature‐sensitive poly(?‐caprolactone)–poly(ethylene glycol)–poly(?‐caprolactone) (PCEC) hydrogel loaded with HA to achieve long‐term lubrication. In addition, Fourier transform infrared, nuclear magnetic resonance analysis, X‐ray diffraction, scanning electron microscopy (SEM), and gel permeation chromatography spectra were used to analyze the structure of the synthetic hydrogel. Rheological test and test tube inverting method were used to characterize the thermosensitivity. The lubrication properties of the released solution were characterized by UV–vis, tribological tests, SEM, and 3D laser confocal scanning microscope. The experimental results reveal that the triblock PCEC hydrogel contains both hydrophilic block and hydrophobic block, and both PCEC and PCEC/HA hydrogels have phase‐changed effect when the temperature increases from room temperature to body temperature. Moreover, the friction coefficient of the released solution from PCEC/HA hydrogel is approximatively 38% lower than that of phosphate buffer saline. And the ability of shear resistance and creep recovery of PCEC/HA hydrogel are better than that of PCEC hydrogel. This study provides an effective approach to achieve long‐time lubrication effect for artificial joints. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46228.     

Right Way of Using Graphene Oxide Additives for Water-Lubricated PEEK: Adding in Polymer or Water?

Water-lubricated polymer is attracting more and more interest from the industry. Adding nanoparticles is considered to be an effective way to improve the tribological performance. In this work, water-lubricated Polyetheretherketone (PEEK)-steel contacts were employed as the objects of study. A careful comparative study was made by investigating the effect of adding graphene oxide (GO) into water or into PEEK. Results show that adding GO into water can significantly reduce the wear and friction coefficient of pure PEEK, which is much more effective than adding GO into PEEK. Under the lubrication of GO aqueous dispersion, the wear of PEEK remains very low even under a harsh condition where the pressure reaches 50 MPa and the linear sliding speed is 0.7 m/s. Neat PEEK and GO/PEEK composites in pure water exhibit serious wear under this harsh condition. The excellent lubricating properties of GO aqueous dispersion are attributed to GO nanosheets entering into solid contacts, which can not only form a protective layer on steel counterpart repairing the worn surface, but also strongly adhere to the PEEK matrix resulting in an in situ-formed GO coating and prevent the scratch by steel counterpart.     

Biodegradable Spheres Protect Traumatically Injured Spinal Cord by Alleviating the Glutamate‐Induced Excitotoxicity

New treatment strategies for spinal cord injury with good therapeutic efficacy are actively pursued. Here, acetalated dextran (AcDX), a biodegradable polymer obtained by modifying vicinal diols of dextran, is demonstrated to protect the traumatically injured spinal cord. To facilitate its administration, AcDX is formulated into microspheres (≈7.2 µm in diameter) by the droplet microfluidic technique. Intrathecally injected AcDX microspheres effectively reduce the traumatic lesion volume and inflammatory response in the injured spinal cord, protect the spinal cord neurons from apoptosis, and ultimately, recover the locomotor function of injured rats. The neuroprotective feature of AcDX microspheres is achieved by sequestering glutamate and calcium ions in cerebrospinal fluid. The scavenging of glutamate and calcium ion reduces the influx of calcium ions into neurons and inhibits the formation of reactive oxygen species. Consequently, AcDX microspheres attenuate the expression of proapoptotic proteins, Calpain, and Bax, and enhance the expression of antiapoptotic protein Bcl‐2. Overall, AcDX microspheres protect traumatically injured spinal cord by alleviating the glutamate‐induced excitotoxicity. This study opens an exciting perspective toward the application of neuroprotective AcDX for the treatment of severe neurological diseases.     

基于多尺度结构特征的快速异源图像匹配

针对异源图像提出一种基于多尺度密集结构特征的快速匹配算法。算法首先利用Gabor滤波器逐像素提取图像中的结构响应,再根据主方向响应对多尺度结构特征融合,然后使用快速傅里叶变换在频域计算各特征分量图像之间的卷积,最后将卷积生成的系数矩阵求和计算出图像之间的相似性并选择相似性最大位置作为匹配结果输出。本文算法能有效适应异源图像间的非线性灰度变化和噪声干扰问题。测试使用可见光、红外、雷达图像组成的异源图像数据集对本文算法和现有算法进行测试比较,结果表明:本文算法的平均误匹配率最低,并且计算速度有明显优势。